The steam sterilizer is the sterilization equipment that can sterilize medical equipment, surgical dressing, medicine liquid, glassware, etc by saturated steam. They enjoy the following merits such as fashionable and attractive appearance, reasonable frame, multiple functions, fast heating, and complete disinfection.

  Purpose: they are used to sterilize following goods by medical treatment and public health, scientific research organization: medical equipment, labware, culture medium and non-sealed liquid or preparations.

FEATURES   

1. This is an automatic control steam sterilizer. This is made by shell, barrel, basket with netting on top, and control system.

2. Shapes are square vertical. The sterilization barrel’s shell and themselves are made of stainless steel. Sterilization barrel（pressure vessel）and safety accessories conform to GB 150、《special equipment’s safety regulation》 and nationality legal pressure vessel provisions by laws and regulations. They must have nameplates and quality certificates that were registered on the legal pressure vessel safety supervision organization.

3. The safety valve is fixed on the vessel’s cover. It can release over pressure to ensure equipment’s safety when inner pressure exceeds 0.24MPa.

4. During the heating process, the deflation valve, which is controlled by a temperature controller, will discharge cold  air automatically. When the temperature on temperature controller exceeds 102℃, the deflation valve will auto-close after several minutes. The equipment goes into auto intermittent deflated function and raises the vessel’s steam saturate degree, which can enhance the sterilization effect.

5. Operating front panel includes a pressure gauge that shows the pressure state clearly.

6. The machine has multiple safety protection. The circuit can automatically shut off when short water in the vessel, heater auto stops operating，protecting the equipment in effect. At the same time, the water indicator light turns red which reminds users to add water until enough.

TECHNICAL PARAMETERS

1. Power supply：AC220V/50Hz or AC110V/60Hz

2. Rated operating pressure：0.22MPa. Rated operating temperature：134℃.

3. When operating normally during sterilization circles, noise shouldn’t be more than 65dB.

4. Setting sterilization temperature scope：50℃～134℃. Sterilizing time scope：4～120min.

5. Safety class：class I.

6. Environmental temperature request：+5℃～+40℃；relative humidity：no more than 85%；atmospheric pressure 70kPa～106kPa.

7. The used water shouldn’t affect sterilizing process, damage the vessel or sterilizing items.