Thermo Fisher 2425-0503 Case of 24 NalgeneEasy to recognize narrow mouthLDPEWash bottles
$318.29 / Parcel$589.42 Min.order：1
Thermo Scientific™ Nalgene™ LDPE narrow-mouth, easy-to-read safety wash bottles use standard, easily identifiable colors and GHS symbols to meet NFPA and ICS chemical container labeling standards. These low-density polyethylene bottles are flexible and easy to squeeze, allowing for ergonomic dispensing. Made from high-quality laboratory-grade plastic materials to reliably reduce leachables and extractables.
Support Payment Term:
HSBC Hong Kong
paypal
Alibaba Pay
Western Union
USD
EUR
GBP
SGD
HKD
CNH
CAD
MXN
BRL
JPY
THB
MOP
AUD
NZD
PLN
CZK
HUF
RON
CHF
SEK
NOK
DKK
TRY
AED
SAR
ILS
ZAR
$0.00
Quantity
Discover similar items
Page 1 of 2
Features:
- Polypropylene or high-density polyethylene bottle cap; polypropylene copolymer filling tube
- Self-venting possible , so the contents are still inside the bottle; preventing self-overflow
- The chemical name, International Society of Chemistry (ICS) chemical formula and Chemical Abstracts Service (CAS) number are printed on the bottle for easy identification
- Colored strips corresponding to colored caps prevent cross-contamination
- Designed to distribute contents through the top, the sealing cap and bent rod are integrated to provide uniform leakage prevention< /li>
- The dispensing head can be shortened to increase the flow rate
- The straw and bottle cap fit tightly to prevent separation when twisting the bottle
Order Information:
Available in multiple identical 16 or 32 oz. (500 or 1000mL) bulk packages; or washed with acetone, ethanol, isopropyl alcohol, methanol and distilled water Five-bottle combination pack consisting of 16 oz./500mL capacity wash bottles.
DISCLAIMER FOR INTERNAL RESEARCH USE LIMITATIONS:Products may only be used by Buyer for Any limitations on internal research do not apply to the products on the web pages to which this statement relates. † The term "leak-proof" applies to Thermo Scientific Nalgene products that meet the following standards: a) For bottle/flask/funnel sealing systems with cap sizes less than 100 mm, when filled with water, at 2 psig gas pressure, inverted 2 minutes, the water inside will not overflow; b) For bottle/funnel/flask sealing systems with cap sizes greater than 100 mm, when filled with water, turn them upside down for 15 minutes, and the water inside will not overflow. Note: If other liquids are used for the above test, different results may be obtained. To ensure safe use, customers are advised to test Thermo Scientific Nalgene bottles and caps under planned application conditions. When used together with Nalgene bottle caps, Thermo Scientific Nalgene products are leak-proof under normal temperatures and pressures.
