- Unbreakable and chemical-resistant, allowing you to use it safely in the laboratory for a long time
- All are manually calibrated, with permanent color-coded scale lines and oval marking areas for convenience You read fluid levels
- No meniscus lens to confuse readings
- Polypropylene cap
- Meets ASTM™ E288 and ISO 384 Class B for consistent quality Same, so you can use with confidence
- Autoclavable/Graduated/Leakproof when used with Nalgene caps†
Warning:Can be autoclaved, but accuracy will be affected. Before autoclaving, completely loosen the threaded cap or remove the cap.
Recycling Information:Please recycle the corrugated cartons and LDPE bags used to package your Nalgene products.
Warning: Can be autoclaved, but accuracy will be affected. Before high temperature and high pressure sterilization, please completely unscrew the screw cap or remove the bottle cap.
†The term "leak-proof" applies to Thermo Scientific Nalgene products that meet the following standards: a) For bottle/flask/funnel sealing systems with cap sizes less than 100 mm, when filled with water, at 2 psig Under gas pressure, if it is inverted for 2 minutes, the water inside will not overflow; b) For a bottle/funnel/flask sealing system with a cap size greater than 100 mm, after it is filled with water, if it is inverted for 15 minutes, the water inside will not overflow. . Note: If other liquids are used for the above test, different results may be obtained. To ensure safe use, customers are advised to test Thermo Scientific Nalgene bottles and closures under planned application conditions. Thermo Scientific Nalgene products are leak-proof at ambient temperature and pressure when used with Nalgene sealing caps.